1 No Brueckner Stenter Machine

        Year : 1975
        4 chambers
        Width : 4000 mm
        Gas ( transformed by Indutherm Year 97 ) with 4 burners
        Horizontal pin/clip chain, mechanical weft straightener
        ( possible change for an electronic )
        Padder of 3400 mm
        Exit to A-frame or plaiter.
        Frequency variator on the exit  

See Full Size Image

1 No Brugman Washing and Scouring Line

         Year : 1985
         Working Width : 3200 mm
         Entrance E&L roller width : 3400 mm
         3 Washing Compartments with High Pressure Squeeze
         1 Impregnation Compartment with Dosing
         Combined steamer, 245 mtr. on rollers and long conveyor belt
         5 Washing Compartments with High Pressure Squeeze
         Batch winder
         Heat Exchanger
         Separate Impregnation Unit with Dosing and Batcher ww.3200mm
         Renewed Electrics
         Automatic Double pH Measuring and Dosing system
         All Main Functions Programmable over Colour Touch Screen Automation

PHOTOS UPON REQUEST

1 No Krantz Stenter Machine

         Mod K10
         Year : 1986
         Width : 3400 mm
         Gas
         6 Burners
         Vertical Pin Chain
         6 Chambers
         Mahlo Orthomat Weft Straightener with 6 readers Model FMC 7A
         Orthomat
         Krantz Padder
         Transformed to gas Year 1997 by Induterm
         Exit to A-Frame or Plaiter

The machine have been renewed with Frequency Variators and Condenser.

PHOTOS UPON REQUEST

    

1 No. Brueckner Stenter Machine

          Year: 1996
          Working width: 2200 mm
          4 chambers
          Cooling zone
          Steam heated
          Combi chain (pins not fitted)
          Mechanical weft straightener
          Krantz Padder (approx. 1970)
          Exit plaiter or A-Frame

See Full Size Image

See Full Size Image

1 No. Brueckner Stenter Machine

          Year : 1983
          Working width : 2200 mm
          2 chambers
          Steam heated
          Vertical pin chain
          Exit plaiter or A-Frame

See Full Size Image

1 No. Artos Babcock Single Layer Stentering Machine

        Year : 1981, No of chambers: 6
        Completely overhauled by Babcock personnel in 1998
        Working width : 2100 mm, Rollers width : 2400 mm
        Pin horizontal return chain with anti-depinning system
        Overfeed system ranging up to + 40%
        4 mts. length of swinging arms
        Fabric edge gumming, Steaming device
        Oil heated, for total length of oven mms. 18.000
        Automatic temperature control with pre-set
        Complete exhausting system, Cooling device
        Fabric delivery in big diameter batches and plate
        Automatic speed synchronization with stenter by dancing roller

1 No. Monforts Stenter Machine

         Year : 1984
         Width of fabric : 1800 mm
         No of Chambers: 9        
         Inclusive fullard Karl Menzl type 1900
         Inclusive straiter Mahlo type RFMC-94, Year : 1994
         With 1 number foulard
         Heating steam
         Completely set of documentacion
         Length of line 53 m

See Full Size Image

See Full Size Image

DRYING AND HEAT SETTING RANGE KRANTZ

One Machine for fabric accumulation

       Make “La Meccanica”
       Year : 2000
       To permit the sewing of single pieces and continuous fabric feed onto the line

One Padder - Make: Beta

       Year : 2000
       Working width : 2200 mm
       Three bowls with pneumatic pressure variable control
       Fabric spreading and guiding at the entry by ‘dogal’ unit manufacture “Corino”,
       Machine complete with dancing roller for the automatic speed
       synchronization with stenter

One automatic weft straightener machine

       Make: Mahlo
       Year : 1997
       Model 10.b with four optical heads

One multi layer stentering machine, Make: Krantz

       Year : 1992
       Model KM.15
       Working width : 2200 mm
       Fabric entry through scroll rollers and edge uncurlers
       Overfeed system ranging up to + 50%
       Fabric edge gumming device
       Steaming unit
       Drying / heat setting chamber with six inside fabric passages for abt. 34 mts. Contents
       Heating by diathermic oil circulation with automatic temperature control and pre-set
       Fabric cooling
       Fabric edge trimmers complete with suction

See Full Size Image

See Full Size Image

See Full Size Image

BRUECKNER MACHINE

One Machine for fabric accumulation

       Make: La Meccanica
       Year : 2000
       To permit the sewing of single pieces and continuous fabric feed onto the line

One Padder

       Make:Beta
       Year : 2000
       Working width : 2200 mm
       Three bowls with pneumatic pressure variable control
       Fabric spreading and guiding at the entry by ‘dogal’ unit manufacture “Corino”
       Machine complete with dancing roller for the automatic speed
       synchronization with stenter

One automatic weft straightener machine

       Make:Mahlo
       Year : 2000
       Model 10/B
       With four optical heads

One Stentering machine

       Make:Bruckner
       Model: VNE/10
       Year : 2000
       With drying/heat setting chamber with two inside fabric passages
       Chambers: 10 of which 5 lower and 5 superposed
       Working width : 2200 mm
       Fabric feed through scroll rollers and edge uncurlers
       Overfeed system ranging up to +50%
       Fabric edge gumming device
       Steaming unit
       Chambers: 10 for fabric drying and/or heat setting

See Full Size Image

See Full Size Image

See Full Size Image

1 No. Bruckner Stenter

        Year: 1973
        Pin chain
        Working width 200 cm
        5 chamber oil heated dryer
        Beta 3 roll padder
        Corino centering device
        Mahlo VMC 10A temperature control.

1 No. Bruckner VN Stenter

        Year : 1997
        Working Width: 200 cm
        Speed 4/80 mts/min
        BIANCO 3-roll padder
        Corino centering device
        Corino weftstraightener type
        Normatex Super Nvertical pin chain
        Introduction 5 mts long5 chamber
        Gas heated dryer
        Long Exit: 15 mts
        Mahlo OPTIPAC combined device
        Type VMC-10/V-4
        Selvedge and temperature control